1. Home
  2. Leisure & specialist
  3. Aircraft hangars

Specialist · Aircraft hangars

Aircraft hangars

Clear-span hangars with doors almost the full width of the gable, sized around your aircraft's wingspan and tail height.

  • 15–40 mspans
  • Up to 30 m widedoors
  • 5–8 meaves
  • Freefirst design
3D render: Aircraft hangar

Typical 24 × 20 m private hangar

480 m² · supply and erect from £188/m²

KitSupply only, with erection drawingsFrom £69,000
Supply and erectThe building, plus installationFrom £90,000
TurnkeyPlus foundations, slab, lighting and powerFrom £168,000

All prices exclude VAT. Guide prices. Delivery is priced separately. Itemised written quote after a site survey. Cost guide →

The example shown

What this example includes

This is the building in the picture and the guide prices above. Every item can be changed in the 3D designer.

  • Clear-span steel frame24 m wide with no posts inside · 4 frames
  • Size24 × 20 m · 480 m² · 6 m to the eaves
  • Hangar door in the gable16 m wide × 5.5 m high
    x1
  • Windows2 × 1 m each
    x2
  • Walk-through doorFor people, separate from the vehicle doors
    x1
  • Steel sheet walls and roofSingle-skin trapezoidal sheet, not insulated
  • ColoursWalls: White aluminium, RAL 9006Roof: White aluminium, RAL 9006Trims: Anthracite, RAL 7016
  • RooflightsRidge strip, 16 × 1.2 m
  • Design and drawingsDesigned for the wind and snow at your site, with a foundation plan

Delivery and installation are not included in the building price; each is priced separately. What is in the price, and what is not →

Ready-made

Enquire about this building

Aircraft hangar, 24 × 20 m, as shown. Nothing to design.

Rough cost, excluding VATFrom £69,000The building only (kit)

All prices exclude VAT. We reply with an itemised quote. Your details are used only to reply. Privacy

Before you design

Planning an aircraft hangar: decide these first

  1. The door is the buildingThe door type and its clear opening decide the gable frame. Choose sliding or folding doors before the steel is designed.
  2. Measure the aircraftWingspan, tail height and the clearance you want around them set the span and the eaves. Draw the parking layout for more than one aircraft.
  3. Wind with the door openA hangar with its door open in a gale is loaded very differently. The frame is designed for it.
  4. Height limitsCheck height limits with the airfield before you fix the eaves.
  5. Apron and thresholdA level threshold and an apron that drains away from the door make moving aircraft easier.
  6. The floorA sealed slab keeps oil and fuel out of the concrete.

More detail

The details

What this building does
  • Clear span for wings

    No columns anywhere near the wingtips.

  • Full-width gable door

    Sliding or bi-fold doors across most of the gable, with the frame designed around them.

  • Workshop corner

    An insulated workshop or clubroom in one corner, divided by a panel wall.

  • Secure

    Steel cladding, lockable doors and a personnel door with panic hardware.

Typical specification

24 × 20 m private hangar

Size
24 m span × 20 m long, to the steel line
Outside the cladding
24.42 × 20.42 m
Floor area
480 m²
Eaves height
6 m to the steel line
Height to ridge
7.55 m to the top of the roof
Clear inside
22.79 m between columns, about 5.0 m under the haunches
Roof pitch
6°
Frames
4 frames, 3 bays at 6.67 m centres
Cladding
Single-skin trapezoidal sheet
Colours
Walls RAL 9006 White aluminium · roof RAL 9006 White aluminium
Side doors
None
Gable doors
1 × 16 m wide × 5.5 m high
Personnel doors
1
Windows
2 × 2 × 1 m
Rooflights
Ridge strip, 16 × 1.2 m
Mezzanine
None
Fire protection
Not included

This is the starting point in the 3D designer. Every item can be changed.

What every building comes with

Every building is designed for the wind and snow at your site, and comes with a foundation plan for your groundworker and an itemised written quote for the option you choose: kit, supply and erect, or turnkey. Delivery and installation are not included in the building price; each is priced separately.

What is in the price, and what is not →

Designing around a wide door

A door almost as wide as the building changes how the frame works.

Airfield sites can have height and lighting rules. Check with the airfield operator early.

Door header
A deep steel beam across the gable carries the roof over the door opening.
Door type
Sliding, folding or bi-fold doors each need different track and header details. Your door supplier confirms them.
Wind
A wide open door means the building has to resist wind blowing straight in. The engineer designs for it.
Our designer
The 3D designer shows the door within the limits of a single opening. Very wide doors are confirmed at survey.
Size it by wingspan

Add at least a metre each side of the wingtips, and allow for the tail height.

AircraftTypical sizeDoorEaves
Microlight or single light aircraft15 × 12 m12 m wide4.5 m
Two light aircraft24 × 20 m16 m wide5.5 m
Flying club, 4 aircraft30 × 30 m24 m wide6 m
Twin or turboprop36 × 30 m30 m wide7 m

Guide sizes only. Measure wingspan, length and tail height from your aircraft's documents.

What changes cost

Estimated change from the typical building above, supply and erect, ex VAT. Worked out with the same model as the 3D designer.

  • Lengthen to 30 mRoom for another aircraftfrom +£27,000
  • Insulate with 80 mm PIR panelsFor a heated hangarfrom +£18,500
  • Raise the eaves to 7 mFor taller tailsfrom +£7,500
  • Go turnkeyWe add foundations, slab, lighting and powerfrom +£74,000
Check it fits. Open this hangar in the 3D designer and add a light aircraft to check the door width and floor space.
Open in the 3D designer
Common questions
How wide can the door be?

Doors can run almost the full width of the gable. Very wide openings need a deep header beam, which we design in.

Does a hangar need planning permission?

Yes, almost always. Airfield operators may also have their own height and lighting rules.

Can we heat the hangar?

Yes. Insulated panels on the walls and roof make heating practical, especially for a workshop area.

More advice and FAQs →

Planning and rules, in brief

  • Planning permission. Most new buildings need it. Your council decides.
  • The airfield. Check with the aerodrome operator as well as the council. Height and position near a runway are restricted.
  • Building Regulations. Almost every new building needs approval. Building control checks the structure, fire safety and, in heated buildings, the insulation.
  • The frame. Designed by a structural engineer to Eurocode 3, for the wind and snow at your site.

A guide for England, not legal advice. The rules we design to →

Design your hangar

Open this hangar in the 3D designer and size it around your aircraft.