1. Home
  2. Leisure & specialist
  3. Garages and home workshops

Leisure · Garages and home workshops

Garages and home workshops

A dry, insulated steel garage or workshop at home, made to measure for your cars, tools and hobbies, and finished to sit well next to the house.

  • From 6 × 6 msizes
  • 2.5–4 meaves
  • Insulated panelsfinish
  • Freefirst design
3D render: Garage and home workshop

Typical 6 × 9 m garage and workshop

54 m² · supply and erect from £250/m²

KitSupply only, with erection drawingsFrom £10,500
Supply and erectThe building, plus installationFrom £13,500
TurnkeyPlus foundations, slab, lighting and powerFrom £25,000

All prices exclude VAT. Guide prices. Delivery is priced separately. Itemised written quote after a site survey. Cost guide →

The example shown

What this example includes

This is the building in the picture and the guide prices above. Every item can be changed in the 3D designer.

  • Clear-span steel frame6 m wide with no posts inside · 3 frames
  • Size6 × 9 m · 54 m² · 3 m to the eaves
  • Gable door2.5 m wide × 2.5 m high
    x1
  • Window1.5 × 1 m
    x1
  • Walk-through doorFor people, separate from the vehicle doors
    x1
  • Insulated walls and roof80 mm PIR insulated panels
  • ColoursWalls: Anthracite, RAL 7016Roof: Anthracite, RAL 7016Trims: Jet black, RAL 9005
  • Design and drawingsDesigned for the wind and snow at your site, with a foundation plan

Delivery and installation are not included in the building price; each is priced separately. What is in the price, and what is not →

Ready-made

Enquire about this building

Garage and home workshop, 6 × 9 m, as shown. Nothing to design.

Rough cost, excluding VATFrom £10,500The building only (kit)

All prices exclude VAT. We reply with an itemised quote. Your details are used only to reply. Privacy

Before you design

Planning a garage or home workshop: decide these first

  1. Height and planningMany garden buildings can be built without a planning application only if the eaves are no higher than 2.5 m. A taller door usually means applying. Planning permission for steel buildings →
  2. Measure your tallest vehicleInclude roof bars and boxes, then choose the door height.
  3. Insulate if you will work in itSingle-skin sheeting drips with condensation in winter. Insulated panels keep tools and cars dry.
  4. The baseA concrete slab with a damp-proof membrane and a level threshold makes the building dry and easy to drive into.
  5. PowerA supply from the house needs a buried armoured cable, and the electrical work must be certified.
  6. Close to the boundaryBuildings near a boundary have extra fire rules. Tick the boundary box in the 3D designer to see them.

More detail

The details

What this building does
  • Room for the car

    An up-and-over or sectional door sized for your car, with space to walk round it.

  • Warm and dry

    Insulated panels on walls and roof stop condensation and keep tools rust-free.

  • Light to work by

    A window over the bench and room for lighting and power.

  • Secure

    Steel panels and a locking personnel door for everyday access.

Typical specification

6 × 9 m garage and workshop

Size
6 m span × 9 m long, to the steel line
Outside the cladding
6.45 × 9.45 m
Floor area
54 m²
Eaves height
3 m to the steel line
Height to ridge
3.81 m to the top of the roof
Clear inside
5.50 m between columns, about 2.6 m under the haunches
Roof pitch
10°
Frames
3 frames, 2 bays at 4.50 m centres
Cladding
80 mm PIR insulated panels
Colours
Walls RAL 7016 Anthracite · roof RAL 7016 Anthracite
Side doors
None
Gable doors
1 × 2.5 m wide × 2.5 m high
Personnel doors
1
Windows
1 × 1.5 × 1 m
Rooflights
None
Mezzanine
None
Fire protection
Not included

This is the starting point in the 3D designer. Every item can be changed.

What every building comes with

Every building is designed for the wind and snow at your site, and comes with a foundation plan for your groundworker and an itemised written quote for the option you choose: kit, supply and erect, or turnkey. Delivery and installation are not included in the building price; each is priced separately.

What is in the price, and what is not →

Size it by cars and bench space

Allow about 3 m width per car, plus space for a bench along one wall.

UseTypical sizeEavesDoor
Single garage6 × 6 m2.5 m2.5 × 2.1 m
Garage and bench6 × 9 m3 m2.5 × 2.5 m
Double garage6 × 12 m3 mTwo doors
Double garage and workshop8 × 12 m3.5 mTwo doors

Guide sizes only. Garages at home may need planning permission depending on size, height and position.

What changes cost

Estimated change from the typical building above, supply and erect, ex VAT. Worked out with the same model as the 3D designer.

  • Lengthen to 12 mDouble garagefrom +£2,500
  • Add a second doorA door for each carfrom +£1,500
  • Upgrade to 100 mm PIR panelsWarmer for a heated workshopabout +£962
  • Go turnkeyWe add the base, lighting and powerfrom +£11,000
Try it in 3D. Open this garage in the designer, add a car and check the door and space.
Open in the 3D designer
Common questions
Do I need planning permission for a garage?

Many outbuildings at home are permitted development within height, size and position limits. Larger garages, or ones near the boundary or in front of the house, may need planning. We'll check.

Can it match the house?

Panels come in a range of colours, and we can add windows and a personnel door to suit.

Can I put it up myself?

Yes. Small buildings are often bought as a kit with erection drawings.

More advice and FAQs →

Planning and rules, in brief

  • Planning. A garage at a house can sometimes be built without a planning application, but the height and position limits are tight, and a tall workshop usually needs permission. Your council decides.
  • Building Regulations. Small detached garages can be exempt. Larger or heated ones need approval. Building control decides.
  • The frame. Designed by a structural engineer to Eurocode 3, for the wind and snow at your site.

A guide for England, not legal advice. The rules we design to →

Design your garage

Open this garage in the 3D designer and set the size and doors.