1. Home
  2. Agricultural & equestrian
  3. Machinery and general purpose stores

Agricultural · General purpose and machinery

Machinery and general purpose stores

A dry, secure building for tractors, combines, implements and bulk storage, with doors tall and wide enough for the biggest machine on the farm.

  • 12–30 mspans
  • 5–8 meaves
  • Up to 8 m widedoors
  • Freefirst design
3D render: General purpose and machinery store

Typical 18 × 30 m machinery store

540 m² · supply and erect from £172/m²

KitSupply only, with erection drawingsFrom £71,000
Supply and erectThe building, plus installationFrom £93,000
TurnkeyPlus foundations, slab, lighting and powerFrom £182,000

All prices exclude VAT. Guide prices. Delivery is priced separately. Itemised written quote after a site survey. Cost guide →

The example shown

What this example includes

This is the building in the picture and the guide prices above. Every item can be changed in the 3D designer.

  • Clear-span steel frame18 m wide with no posts inside · 6 frames
  • Size18 × 30 m · 540 m² · 6 m to the eaves
  • Gable door6 m wide × 5.6 m high
    x1
  • Side doors5 m wide × 5 m high each
    x2
  • Walk-through doorFor people, separate from the vehicle doors
    x1
  • Steel sheet walls and roofSingle-skin trapezoidal sheet, not insulated
  • ColoursWalls: Moss green, RAL 6005Roof: Grey aluminium, RAL 9007Trims: Moss green, RAL 6005
  • RooflightsRooflight panels in each bay
  • Design and drawingsDesigned for the wind and snow at your site, with a foundation plan

Delivery and installation are not included in the building price; each is priced separately. What is in the price, and what is not →

Ready-made

Enquire about this building

General purpose and machinery store, 18 × 30 m, as shown. Nothing to design.

Rough cost, excluding VATFrom £71,000The building only (kit)

All prices exclude VAT. We reply with an itemised quote. Your details are used only to reply. Privacy

Before you design

Planning a machinery store: decide these first

  1. Measure the biggest machineMeasure it as it will be parked, with the header or boom folded. Then allow for the next one being bigger.
  2. Open front or doorsAn open front is cheaper and quicker to use. Doors are more secure. Face an open side away from the prevailing wind.
  3. Tipping insideIf trailers will tip indoors, the raised body sets the eaves height.
  4. The floorConcrete is easier to keep clean and work on. Compacted hardcore is cheaper for a pure store.
  5. Might it hold grain later?Say so now. A frame that will take grain walling has to be designed for that load from the start.
  6. PlanningMany farm buildings can go ahead after notifying the council. Planning permission for steel buildings →

More detail

The details

What this building does
  • Room for big machines

    Eaves and doors sized from your combine, sprayer or telehandler, with clearance.

  • Doors where you work

    A tall gable door for the big machines and side doors for daily use.

  • Secure and dry

    Steel cladding and lockable doors keep machinery out of the weather and out of sight.

  • Daylight without power

    Rooflight panels in every bay, so you rarely need the lights on.

Typical specification

18 × 30 m machinery store

Size
18 m span × 30 m long, to the steel line
Outside the cladding
18.36 × 30.36 m
Floor area
540 m²
Eaves height
6 m to the steel line
Height to ridge
8.68 m to the top of the roof
Clear inside
17.19 m between columns, about 5.4 m under the haunches
Roof pitch
15°
Frames
6 frames, 5 bays at 6.00 m centres
Cladding
Single-skin trapezoidal sheet
Colours
Walls RAL 6005 Moss green · roof RAL 9007 Grey aluminium
Side doors
2 × 5 m wide × 5 m high
Gable doors
1 × 6 m wide × 5.6 m high
Personnel doors
1
Windows
None
Rooflights
Rooflight panels in each bay
Mezzanine
None
Fire protection
Not included

This is the starting point in the 3D designer. Every item can be changed.

What every building comes with

Every building is designed for the wind and snow at your site, and comes with a foundation plan for your groundworker and an itemised written quote for the option you choose: kit, supply and erect, or turnkey. Delivery and installation are not included in the building price; each is priced separately.

What is in the price, and what is not →

Agricultural permitted development

Some farm buildings in England don't need full planning permission.

General guidance only. Rules differ in Wales, Scotland and Northern Ireland, and your council confirms what applies.

Permitted development
On agricultural units of 5 hectares or more, many farm buildings fall under permitted development, within size and location limits.
Prior approval
You still notify the council first, and they can ask for prior approval of the siting, design and appearance.
When it doesn't apply
Smaller holdings, sites near roads or houses, and buildings over the size limits need full planning permission.
Our part
We prepare the drawings for either route.
Size it by your biggest machine

Measure the tallest and widest machine with everything folded, then add clearance.

UseTypical sizeEavesMain door
Small farm or estate12 × 18 m5 m4 × 4.5 m
Tractors and implements18 × 30 m6 m6 × 5.5 m
Combine and sprayer24 × 36 m7 m8 × 6.5 m
Contractor's yard30 × 48 m8 m8 × 7 m

Guide sizes only. Door height is limited by the eaves, less about 400 mm.

What changes cost

Estimated change from the typical building above, supply and erect, ex VAT. Worked out with the same model as the 3D designer.

  • Raise the eaves to 7 mFor a combine or tall sprayerfrom +£6,000
  • Lengthen to 36 mOne more 6 m bayfrom +£12,500
  • Add a third side doorAnother bay with drive-in accessfrom +£6,000
  • Insulate with 80 mm PIR panelsFor a heated farm workshopfrom +£21,000
  • Go turnkeyWe add foundations, slab, lighting and powerfrom +£84,500
Check it fits. Open this store in the 3D designer and add a tractor to check the doors and floor space.
Open in the 3D designer
Common questions
Do I need planning permission for a farm building?

Not always. On holdings of 5 hectares or more in England, many agricultural buildings can be permitted development with prior approval. We'll tell you which route applies.

Can it have open sides?

Yes. Many machinery stores are open on one side. Tell us at survey and we'll design the frame and bracing for it.

Can part of it be a workshop?

Yes. An insulated workshop bay with its own door can sit at one end, divided by a panel wall.

More advice and FAQs →

Planning and rules, in brief

  • Planning. Some farm buildings can go up with the council's prior approval instead of a full planning application. It depends on the size of the farm, the building and where it stands. Your council decides.
  • Building Regulations. A farm building can be exempt if no one lives in it, it is far enough from anywhere people sleep and it has fire exits close by. Ask building control.
  • The frame. Designed by a structural engineer to BS 5502-22 and Eurocode 3, for the wind and snow at your site.

A guide for England, not legal advice. The rules we design to →

Design your machinery store

Open this store in the 3D designer and size it around your machines.