1. Home
  2. Agricultural & equestrian
  3. Livestock buildings

Agricultural · Cattle and sheep

Livestock buildings

Airy, well-ventilated housing for cattle and sheep, with a central feed passage and room to get machinery in for mucking out.

  • 18–30 mspans
  • 4–5.5 meaves
  • 12–15° pitchroof
  • Freefirst design
3D render: Livestock building

Typical 24 × 36 m livestock building

864 m² · supply and erect from £134/m²

KitSupply only, with erection drawingsFrom £90,000
Supply and erectThe building, plus installationFrom £116,000
TurnkeyPlus foundations, slab, lighting and powerFrom £257,000

All prices exclude VAT. Guide prices. Delivery is priced separately. Itemised written quote after a site survey. Cost guide →

The example shown

What this example includes

This is the building in the picture and the guide prices above. Every item can be changed in the 3D designer.

  • Clear-span steel frame24 m wide with no posts inside · 7 frames
  • Size24 × 36 m · 864 m² · 4.5 m to the eaves
  • Gable doors4 m wide × 4 m high each
    x2
  • Walk-through doorsFor people, separate from the vehicle doors
    x2
  • Steel sheet walls and roofSingle-skin trapezoidal sheet, not insulated
  • ColoursWalls: Moss green, RAL 6005Roof: Grey aluminium, RAL 9007Trims: Moss green, RAL 6005
  • RooflightsRooflight panels in each bay
  • Design and drawingsDesigned for the wind and snow at your site, with a foundation plan

Delivery and installation are not included in the building price; each is priced separately. What is in the price, and what is not →

Ready-made

Enquire about this building

Livestock building, 24 × 36 m, as shown. Nothing to design.

Rough cost, excluding VATFrom £90,000The building only (kit)

All prices exclude VAT. We reply with an itemised quote. Your details are used only to reply. Privacy

Before you design

Planning a livestock building: decide these first

  1. Ventilation is the designFresh air through an open ridge and the side walls keeps stock healthy. The width of the building changes how well it works.
  2. Size it from the stockSpace per animal and feed space set the size. Use the welfare codes and your assurance scheme, not a round number.
  3. Wind and rainThink about the prevailing wind and driving rain when you place open sides and doors.
  4. Floors, drains and slurryFalls and channels are formed in the slab. Slurry and dirty water storage has its own rules.
  5. Near housesLivestock buildings close to homes have extra planning restrictions. Planning permission for steel buildings →
  6. Gates and barriersTell us where gates and feed barriers fix to the steel, so the columns are designed for it.

More detail

The details

What this building does
  • Feed passage and pens

    A central drive-through feed passage with pens either side, laid out to your system.

  • Natural ventilation

    Steep roof pitch and ridge ventilation keep air moving to keep stock healthy.

  • Drive-through doors

    Doors at both gables so the tractor and feeder never need to reverse.

  • Galvanised for wet conditions

    Galvanised steel stands up to the damp and ammonia of livestock housing.

Typical specification

24 × 36 m livestock building

Size
24 m span × 36 m long, to the steel line
Outside the cladding
24.36 × 36.36 m
Floor area
864 m²
Eaves height
4.5 m to the steel line
Height to ridge
7.98 m to the top of the roof
Clear inside
22.94 m between columns, about 3.7 m under the haunches
Roof pitch
15°
Frames
7 frames, 6 bays at 6.00 m centres
Cladding
Single-skin trapezoidal sheet
Colours
Walls RAL 6005 Moss green · roof RAL 9007 Grey aluminium
Side doors
None
Gable doors
2 × 4 m wide × 4 m high
Personnel doors
2
Windows
None
Rooflights
Rooflight panels in each bay
Mezzanine
None
Fire protection
Not included

This is the starting point in the 3D designer. Every item can be changed.

What every building comes with

Every building is designed for the wind and snow at your site, and comes with a foundation plan for your groundworker and an itemised written quote for the option you choose: kit, supply and erect, or turnkey. Delivery and installation are not included in the building price; each is priced separately.

What is in the price, and what is not →

Size it by herd

Pen areas depend on the animals and the housing system. These are typical buildings.

UseTypical sizeEavesLayout
Sheep and lambing shed18 × 30 m4 mPens and central passage
Suckler cattle24 × 36 m4.5 mPens either side of feed passage
Dairy youngstock24 × 48 m4.5 mCubicles and pens
Finishing unit30 × 60 m5 mLarge pens

Guide sizes only. Space boarding, gates and feed barriers are added to suit your system.

What changes cost

Estimated change from the typical building above, supply and erect, ex VAT. Worked out with the same model as the 3D designer.

  • Lengthen to 48 mTwo more baysfrom +£31,500
  • Add a side doorAccess to a handling areafrom +£4,000
  • Raise the eaves to 5 mMore headroom for machineryfrom +£1,000
  • Go turnkeyWe add foundations, slab, lighting and powerfrom +£132,500
Try it in 3D. Open this building in the designer and change the size and doors.
Open in the 3D designer
Common questions
Can the walls be space boarded?

Yes. Timber space boarding above solid lower walls is common for ventilation. It isn't in the online designer, so we price it at survey.

Does a livestock building need planning?

Livestock buildings near houses have extra restrictions under permitted development. We'll check the distances and advise on the right route.

How is the slab drained?

Slabs are laid to falls towards channels and a dirty water system. We design the levels with your drainage plan.

More advice and FAQs →

Planning and rules, in brief

  • Planning. Some farm buildings can go up with the council's prior approval instead of a full planning application. It depends on the size of the farm, the building and where it stands. Your council decides.
  • Building Regulations. A farm building can be exempt if no one lives in it, it is far enough from anywhere people sleep and it has fire exits close by. Ask building control.
  • The frame. Designed by a structural engineer to BS 5502-22 and Eurocode 3, for the wind and snow at your site.

A guide for England, not legal advice. The rules we design to →

Design your livestock building

Open this building in the 3D designer and set the size and doors.