1. Home
  2. Commercial & industrial
  3. Warehouses

Storage and logistics · Racking and loading

Steel warehouse buildings

Wide clear spans and tall eaves so you can rack high and run forklifts freely, with loading doors sized for HGVs. Wider buildings can use an internal column line to save steel.

  • 20–40 mspans
  • 8–12 meaves
  • 5 m for HGVsdoors
  • Freefirst design
3D render: Warehouse

Typical 24 × 42 m warehouse

1008 m² · supply and erect from £181/m²

KitSupply only, with erection drawingsFrom £140,000
Supply and erectThe building, plus installationFrom £182,000
TurnkeyPlus foundations, slab, lighting and powerFrom £345,000

All prices exclude VAT. Guide prices. Delivery is priced separately. Itemised written quote after a site survey. Cost guide →

The example shown

What this example includes

This is the building in the picture and the guide prices above. Every item can be changed in the 3D designer.

  • Clear-span steel frame24 m wide with no posts inside · 8 frames
  • Size24 × 42 m · 1008 m² · 8 m to the eaves
  • Gable doors5 m wide × 5 m high each
    x2
  • Side doors5 m wide × 5 m high each
    x3
  • Walk-through doorsFor people, separate from the vehicle doors
    x2
  • Steel sheet walls and roofSingle-skin trapezoidal sheet, not insulated
  • ColoursWalls: Grey aluminium, RAL 9007Roof: White aluminium, RAL 9006Trims: Anthracite, RAL 7016
  • RooflightsRidge strip, 36 × 1.5 m
  • Design and drawingsDesigned for the wind and snow at your site, with a foundation plan

Delivery and installation are not included in the building price; each is priced separately. What is in the price, and what is not →

Ready-made

Enquire about this building

Warehouse, 24 × 42 m, as shown. Nothing to design.

Rough cost, excluding VATFrom £140,000The building only (kit)

All prices exclude VAT. We reply with an itemised quote. Your details are used only to reply. Privacy

Before you design

Planning a warehouse: decide these first

  1. Racking sets the heightIt is the clear height under the haunch, not the eaves height, that decides how many pallet levels fit.
  2. Dock or level accessDock levellers need a lowered yard or a raised floor. Level-access doors are simpler and suit vans and forklifts.
  3. Which trucks you will useNarrow-aisle trucks need a flatter floor than ordinary forklifts. Say which before the slab is designed.
  4. Fire and your insurerLarge or high-bay storage may need sprinklers and smoke vents. Ask your insurer early, because both affect the roof and the frame.
  5. Heated or notUnheated storage can use single-skin sheeting with an anti-condensation lining. Packing areas and offices need insulated panels.
  6. Plan the yard with the doorsAn articulated lorry needs depth to reverse onto a door. The yard often decides where the building sits.

More detail

The details

What this building does
  • Rack high

    8 m eaves on this layout leave room for four pallet levels. Taller eaves add a level every 1.5 m or so.

  • HGV loading

    5 m sectional doors on the side and gable for curtain-siders and box trailers.

  • Daylight down the aisles

    A continuous rooflight strip along the ridge.

  • Simple, tough envelope

    Single-skin sheet keeps the cost down for unheated storage. Insulated panels are an upgrade.

Typical specification

24 × 42 m warehouse

Size
24 m span × 42 m long, to the steel line
Outside the cladding
24.36 × 42.36 m
Floor area
1008 m²
Eaves height
8 m to the steel line
Height to ridge
9.52 m to the top of the roof
Clear inside
22.79 m between columns, about 7.2 m under the haunches
Roof pitch
6°
Frames
8 frames, 7 bays at 6.00 m centres
Cladding
Single-skin trapezoidal sheet
Colours
Walls RAL 9007 Grey aluminium · roof RAL 9006 White aluminium
Side doors
3 × 5 m wide × 5 m high
Gable doors
2 × 5 m wide × 5 m high
Personnel doors
2
Windows
None
Rooflights
Ridge strip, 36 × 1.5 m
Mezzanine
None
Fire protection
Not included

This is the starting point in the 3D designer. Every item can be changed.

What every building comes with

Every building is designed for the wind and snow at your site, and comes with a foundation plan for your groundworker and an itemised written quote for the option you choose: kit, supply and erect, or turnkey. Delivery and installation are not included in the building price; each is priced separately.

What is in the price, and what is not →

Set the eaves from your racking

Eaves height decides how many pallet levels you get. These figures assume 1.2–1.5 m high loads and standard beam spacing.

EavesUsable height (approx.)Pallet levelsSuits
6 m5.2 m3Small stores, trade counters
8 m7.2 m4General warehousing
10 m9.2 m5Distribution
12 m11.2 m6–7High-bay, very narrow aisle

Guide figures only. Haunches reduce the height near the columns, and sprinklers or lighting may need extra clearance. Your racking supplier confirms the layout.

What changes cost

Estimated change from the typical building above, supply and erect, ex VAT. Worked out with the same model as the 3D designer.

  • Raise the eaves to 10 mAbout one more pallet levelfrom +£16,000
  • Add a fourth HGV doorMore loading positionsfrom +£6,000
  • Lengthen to 48 mOne more 6 m bayfrom +£18,000
  • Upgrade to 80 mm PIR panelsFor heated or ambient-controlled stockfrom +£37,000
  • Add a 10% office mezzanineTransport office over the loading endfrom +£19,500
  • Go turnkeyWe add foundations, slab, lighting and powerfrom +£154,500
Check it fits. The 3D designer opens this warehouse with an HGV, two forklifts and four racking runs, and flags anything too tall or too long.
Open in the 3D designer
Common questions
Does a warehouse slab need to be special?

Racking puts high point loads on the floor, and very narrow aisle trucks need a very flat slab. We design the slab for your racking loads and truck type.

Should a wide warehouse have internal columns?

Above about 30 m span, a row of internal columns can save a lot of steel. It suits block-stacked or racked stores where the columns can sit in a racking line.

Can we add a loading dock?

Yes. We can design the slab and door openings for dock levellers and dock shelters, or level-access doors with ramps.

More advice and FAQs →

Planning and rules, in brief

  • Planning permission. Most new buildings need it. Your council decides.
  • Building Regulations. Almost every new building needs approval. Building control checks the structure, fire safety and, in heated buildings, the insulation.
  • The frame. Designed by a structural engineer to Eurocode 3, for the wind and snow at your site.

A guide for England, not legal advice. The rules we design to →

Design your warehouse

Open this warehouse in the 3D designer, add racking and an HGV, and check the eaves.