1. Home
  2. Automotive
  3. MOT and service centres

Motor trade · MOT and servicing

MOT and service centre buildings

Test lanes, lift bays and a customer reception under one clear-span roof. We lay out the floor around your equipment and the current DVSA guidance before the steel is designed.

  • 2–8bays
  • 5–6.5 meaves
  • Up to 4.5 m highdoors
  • Freefirst design
3D render: MOT and service centre

Typical 15 × 20 m MOT and service centre

300 m² · supply and erect from £220/m²

KitSupply only, with erection drawingsFrom £51,000
Supply and erectThe building, plus installationFrom £66,000
TurnkeyPlus foundations, slab, lighting and powerFrom £117,000

All prices exclude VAT. Guide prices. Delivery is priced separately. Itemised written quote after a site survey. Cost guide →

The example shown

What this example includes

This is the building in the picture and the guide prices above. Every item can be changed in the 3D designer.

  • Clear-span steel frame15 m wide with no posts inside · 4 frames
  • Size15 × 20 m · 300 m² · 5.5 m to the eaves
  • Side doors4 m wide × 4.5 m high each
    x3
  • Walk-through doorFor people, separate from the vehicle doors
    x1
  • Insulated walls and roof80 mm PIR insulated panels
  • ColoursWalls: Light grey, RAL 7035Roof: White aluminium, RAL 9006Trims: Anthracite, RAL 7016
  • RooflightsRooflight panels in each bay
  • Design and drawingsDesigned for the wind and snow at your site, with a foundation plan

Delivery and installation are not included in the building price; each is priced separately. What is in the price, and what is not →

Ready-made

Enquire about this building

MOT and service centre, 15 × 20 m, as shown. Nothing to design.

Rough cost, excluding VATFrom £51,000The building only (kit)

All prices exclude VAT. We reply with an itemised quote. Your details are used only to reply. Privacy

Before you design

Planning an MOT and service centre: decide these first

  1. Fix the test lane firstDVSA sets minimum bay sizes and headroom for each test class. Size the building around the approved lane, not the other way round.
  2. Lifts and pitsRecessed lifts and pits are formed in the slab before the concrete is poured. Choose the equipment before the foundations are designed.
  3. HeadroomA van at full height on a lift sets the eaves height, especially for Class 7 testing.
  4. CustomersPlan reception and a waiting area with a view of the test bay.
  5. DoorsOne door per bay is quicker in use. A drive-through lane avoids reversing but needs space at both ends.
  6. Floor drainageAsk your water company what the floor drains must discharge through before the slab is designed.

More detail

The details

What this building does
  • Lift bays that work

    Eaves set so a van on a 2-post lift clears the roof steel, and slab thickened under every lift post.

  • A door per bay

    Three 4 m sectional doors on this layout, so every bay can be driven in and out without shuffling cars.

  • Class 4 and Class 7

    Taller doors and a longer lane if you test vans up to 3,500 kg as well as cars.

  • Reception and staff room

    A mezzanine or a block at one end for the customer desk, waiting area and welfare.

Typical specification

15 × 20 m MOT and service centre

Size
15 m span × 20 m long, to the steel line
Outside the cladding
15.51 × 20.51 m
Floor area
300 m²
Eaves height
5.5 m to the steel line
Height to ridge
6.62 m to the top of the roof
Clear inside
14.19 m between columns, about 4.8 m under the haunches
Roof pitch
6°
Frames
4 frames, 3 bays at 6.67 m centres
Cladding
80 mm PIR insulated panels
Colours
Walls RAL 7035 Light grey · roof RAL 9006 White aluminium
Side doors
3 × 4 m wide × 4.5 m high
Gable doors
None
Personnel doors
1
Windows
None
Rooflights
Rooflight panels in each bay
Mezzanine
None
Fire protection
Not included

This is the starting point in the 3D designer. Every item can be changed.

What every building comes with

Every building is designed for the wind and snow at your site, and comes with a foundation plan for your groundworker and an itemised written quote for the option you choose: kit, supply and erect, or turnkey. Delivery and installation are not included in the building price; each is priced separately.

What is in the price, and what is not →

Setting up an MOT test centre

To run MOT tests you need DVSA approval for the business and the premises. The premises side is where the building matters.

We don't publish bay dimensions here because DVSA sets and updates them. We work from the current MOT testing guide and your equipment supplier's approved layout, and you confirm with DVSA before you build.

DVSA approval
You apply to DVSA to become an authorised examiner and have the premises approved as a vehicle testing station before testing starts.
Test bay layout
DVSA sets minimum test bay sizes and equipment layouts for each vehicle class. Class 7 bays, for goods vehicles up to 3,500 kg, are larger than Class 4.
Approved equipment
Brake testers, headlamp aim, emissions and other equipment must be DVSA-approved, and each item has its own floor and power needs.
Space around the bay
Room to walk round the vehicle, safe access to pits or lifts, and a clear route in and out of the bay.
Plan the bays first

The number of bays sets the length. Test bays need a set length and width for the equipment, so we work from DVSA guidance and your equipment supplier's layout drawings.

LayoutTypical sizeEavesDoors
1 test bay + 1 lift12 × 15 m4.5 m2 × 3.5 m wide
1 test bay + 3 lifts15 × 20 m5.5 m3 × 4 m wide
Class 4 and 7 lanes + 4 lifts18 × 30 m6 m4 × 4.5 m wide
Dealer service centre, 8 bays20 × 36 m6.5 m6 × 4.5 m wide

Guide sizes only. DVSA sets the requirements for test bays and approves the premises; your equipment supplier provides the bay layout.

What changes cost

Estimated change from the typical building above, supply and erect, ex VAT. Worked out with the same model as the 3D designer.

  • Add a fourth bay and doorMakes it 15 × 26 mfrom +£17,000
  • Raise the eaves to 6 mMore clearance for vans on liftsfrom +£3,500
  • Add a 20% mezzanineReception, waiting room or parts storefrom +£11,500
  • Add windows to the sideFour 3 × 1 m windows for daylightfrom +£6,000
  • Upgrade to 100 mm PIR panelsWarmer for staff and customersfrom +£4,000
  • Go turnkeyWe add foundations, slab, pits, lighting and powerfrom +£48,000
Check it fits. The 3D designer opens this centre with two lift bays, a car and a van. It warns you if a van on a lift is too tall for the eaves.
Open in the 3D designer
Common questions
Do you design the floor for the MOT equipment?

Yes. We take the layout drawings from your equipment supplier and design the slab, any pits and the thickened pads under lift posts and brake testers to suit.

How tall do the doors need to be for vans?

A high-roof panel van is about 2.7 m tall. On a 2-post lift it can need 4.2 m or more under the roof steel. We set the eaves and door heights from the tallest vehicle you'll work on.

Can we stay open while you build?

Often, yes. A new building next to your current site can be built while you keep trading, then you move in over a weekend.

More advice and FAQs →

Planning and rules, in brief

  • Planning permission. Most new buildings need it. Your council decides.
  • Building Regulations. Almost every new building needs approval. Building control checks the structure, fire safety and, in heated buildings, the insulation.
  • The frame. Designed by a structural engineer to Eurocode 3, for the wind and snow at your site.

A guide for England, not legal advice. The rules we design to →

Design your MOT centre

Open this layout in the 3D designer, add lift bays and check the doors.