1. Home
  2. Automotive
  3. Dealership workshops

Automotive · Franchise and independent dealers

Dealership workshop buildings

Aftersales buildings planned around your bay count, your manufacturer's standards and the way cars move from reception to bay to handover. Clear span, so the layout can change as the franchise does.

  • 6–16bays
  • 6–7 meaves
  • 18–24 m clearspan
  • Freefirst design
3D render: Dealership workshop

Typical 20 × 36 m dealership workshop

720 m² · supply and erect from £282/m²

KitSupply only, with erection drawingsFrom £156,000
Supply and erectThe building, plus installationFrom £203,000
TurnkeyPlus foundations, slab, lighting and powerFrom £322,000

All prices exclude VAT. Guide prices. Delivery is priced separately. Itemised written quote after a site survey. Cost guide →

The example shown

What this example includes

This is the building in the picture and the guide prices above. Every item can be changed in the 3D designer.

  • Clear-span steel frame20 m wide with no posts inside · 7 frames
  • Size20 × 36 m · 720 m² · 6.5 m to the eaves
  • Gable door5 m wide × 5 m high
    x1
  • Side doors4.5 m wide × 5 m high each
    x4
  • Windows3 × 1 m each
    x4
  • Walk-through doorsFor people, separate from the vehicle doors
    x2
  • Insulated walls and roof80 mm PIR insulated panels
  • ColoursWalls: Anthracite, RAL 7016Roof: White aluminium, RAL 9006Trims: Jet black, RAL 9005
  • RooflightsRooflight panels in each bay
  • Mezzanine floorAbout 108 m² (15% of the floor), sourced for you
  • Fire protectionIntumescent coating on the steel frame
  • Design and drawingsDesigned for the wind and snow at your site, with a foundation plan

Delivery and installation are not included in the building price; each is priced separately. What is in the price, and what is not →

Ready-made

Enquire about this building

Dealership workshop, 20 × 36 m, as shown. Nothing to design.

Rough cost, excluding VATFrom £156,000The building only (kit)

All prices exclude VAT. We reply with an itemised quote. Your details are used only to reply. Privacy

Before you design

Planning a dealership workshop: decide these first

  1. Get the brand standardsMost manufacturers set standards for bays, finishes and reception. Have them in hand before you design.
  2. Count the baysService, MOT, diagnostics, wash and handover each need their own space. Draw the route a car takes through them.
  3. Electric vehicle workAllow a bay with extra room around it for high-voltage work, and plan the chargers and their power supply.
  4. PartsA parts store on a mezzanine frees the workshop floor. Tell us what it will carry.
  5. FumesExhaust extraction and ventilation need routes through the roof or walls. Fix them before the cladding is ordered.

More detail

The details

What this building does
  • Drive-through service reception

    A covered reception lane at one end so customers hand over keys out of the rain, with the workshop behind.

  • Bays to the brand standard

    Bay widths, lift positions and door sizes set from your manufacturer's aftersales guidelines and your lift supplier's drawings.

  • EV-ready bays

    Power, isolation and a separate quarantine area for damaged high-voltage vehicles can be designed in from the start.

  • Parts and staff over the floor

    A mezzanine for the parts store, technician welfare and offices keeps the ground floor for bays.

Typical specification

20 × 36 m dealership workshop

Size
20 m span × 36 m long, to the steel line
Outside the cladding
20.45 × 36.45 m
Floor area
720 m²
Eaves height
6.5 m to the steel line
Height to ridge
7.86 m to the top of the roof
Clear inside
19.09 m between columns, about 5.7 m under the haunches
Roof pitch
6°
Frames
7 frames, 6 bays at 6.00 m centres
Cladding
80 mm PIR insulated panels
Colours
Walls RAL 7016 Anthracite · roof RAL 9006 White aluminium
Side doors
4 × 4.5 m wide × 5 m high
Gable doors
1 × 5 m wide × 5 m high
Personnel doors
2
Windows
4 × 3 × 1 m
Rooflights
Rooflight panels in each bay
Mezzanine
15% of floor, about 108 m²
Fire protection
Intumescent coating

This is the starting point in the 3D designer. Every item can be changed.

What every building comes with

Every building is designed for the wind and snow at your site, and comes with a foundation plan for your groundworker and an itemised written quote for the option you choose: kit, supply and erect, or turnkey. Delivery and installation are not included in the building price; each is priced separately.

What is in the price, and what is not →

What we design around

Every franchise has its own aftersales standards. We work from your manufacturer's guidelines and your equipment suppliers' layouts, so the frame doesn't fight the fit-out.

Brand standards change, so we confirm the current guidelines with your manufacturer's facilities team before design.

Bay count and flow
Reception, bays, wash and handover in the order cars actually move, with doors where the flow needs them.
Lifts and pits
Thickened slab pads under every lift post, and pits or ramps where your equipment needs them.
Brand standards
Cladding colours, glazing and signage zones to the manufacturer's corporate identity guide.
Services runs
Compressed air, oil, coolant and exhaust extraction planned before the slab is poured.
Size it by bays

Workshop length follows the number of bays along each side. These are typical sizes for franchise aftersales.

WorkshopTypical sizeEavesDoors
6 service bays18 × 24 m6 m3 × 4.5 m wide
10 service bays20 × 36 m6.5 m4 × 4.5 m wide
14 bays + MOT lane24 × 48 m6.5 m6 × 4.5 m wide
Bays + service reception24 × 54 m7 mDrive-through lane

Guide sizes only. Your lift and equipment suppliers' layouts set the final dimensions.

What changes cost

Estimated change from the typical building above, supply and erect, ex VAT. Worked out with the same model as the 3D designer.

  • Add two more baysMakes it 20 × 42 mfrom +£30,000
  • Increase the mezzanine to 30%Parts store, welfare and officesfrom +£21,000
  • Add a glazed service receptionCurtain walling across the front gablefrom +£39,500
  • Upgrade to 100 mm PIR panelsWarmer bays for techniciansfrom +£8,000
  • Raise the eaves to 7 mMore clearance over lifted vansfrom +£6,000
  • Go turnkeyWe add foundations, slab, lighting and powerfrom +£112,000
Check it fits. Open this workshop in the 3D designer and add lift bays, cars and vans to check the bay count, door heights and eaves.
Open in the 3D designer
Common questions
Can you build to our manufacturer's standards?

Yes. We take the current corporate identity and aftersales guidelines from your manufacturer's facilities team and design the frame, cladding, glazing and doors to suit.

Do we need a separate area for electric vehicles?

Industry guidance recommends a safe quarantine area for damaged high-voltage vehicles and insulated equipment for EV work. We can design a separate bay or external quarantine area, and the power supply for charging.

Can the workshop stay open while you extend it?

Often, yes. Portal frames can be extended by adding bays at the gable end, which keeps most of the existing workshop running during the work.

More advice and FAQs →

Planning and rules, in brief

  • Planning permission. Most new buildings need it. Your council decides.
  • Building Regulations. Almost every new building needs approval. Building control checks the structure, fire safety and, in heated buildings, the insulation.
  • The frame. Designed by a structural engineer to Eurocode 3, for the wind and snow at your site.

A guide for England, not legal advice. The rules we design to →

Design your dealership workshop

Open this workshop in the 3D designer and set the bays, doors and mezzanine.